鋁合金升降機采用的都是液壓的動力形式，液壓油缸也是根據不同的機器進行定制的，所以不同的設備所使用的液壓油缸大小和長度也不相同。決定液壓缸大小的因素主要是載重量，一個合適的載重量配合著一個合適的液壓動力，但因為他們是相互影響的，但有一些鋁合金升降機的油缸的數量和長度根升降的高度也有關系。升降的高度越高，則油缸的數量越多，長度也會增加。
Aluminum Alloy lifts are used in the form of hydraulic power, the hydraulic cylinder is customized according to different machines, so the hydraulic cylinder size and length of use of different equipment is not the same. Factors that determine the size of the hydraulic cylinder is mainly carrying capacity, a suitable load with a suitable hydraulic power, but because they are mutual influence, but some aluminum alloy elevator cylinder number and length of root lifting height. The lifting height is, the more the number of the oil cylinder length will increase.
鋁合金升降機液壓系統的壓力不是隨便設定的，主要是考慮到材質的問題，壓制指數越高，說明制作的材料越好，越精致，不然差的材料非常容易發生爆裂的危險。不同的空間可以根據以下的公式：作用力=壓力*面積，這里的面積就是因為鋁合金升降機的空間限制跟控制住了，所以壓力越大，作用力一般也就越大。而作用力是根據所要運送的貨物重量計算的，鋁合金升降機買之前你預估貨物大概有多少重量，或者直接拉到地磅上直接稱量一下都可以，然后再確定選用哪種液壓缸。
Aluminum alloy elevator hydraulic system pressure not just set, mainly considering material and suppression index higher, making better the materials, more delicate, or poor materials very prone to danger of bursting. Different space can be based on the following formula: force = pressure * area, where the size of the area is because of the aluminum alloy elevator control space constraints, so the greater the pressure, the greater the force. And the force is calculated according to the weight of goods to be transported, aluminum alloy elevator before buying you anticipate about how much weight of goods, or directly to loadometer on direct weighing my, and then determine the selection of what kind of hydraulic cylinder.
請長按保存二維碼后點擊確定按鈕，進入微信掃一掃界面,點擊右上角‘相冊’選擇我們的二維碼,再點擊右上角‘完成’識別添加。
(為防止瀏覽器錯誤識別，請勿直接在瀏覽器中識別二維碼)
