在用戶確定好升降機的型號及參數和用途后，技術人員要根據這些出事參數要求進行個性化設計，下面濟南天銳升降機械的有關專家就給大家介紹一下升降機是如何設計的？
1、升降機總體設計的主要結構參數包括尺寸參數、運動參數、動力參數、占用面積和空間等；總體布局包括部件組成、各部件的空間位置布局和各部件相對運動配合關系。在確定總體布局時，應充分考慮使用維護的方便性、安全性、外觀造型、環境保護和對環境的要求等關系；系統原理圖包括產品總體布局圖、機械傳動系統圖、液壓系統圖、電力驅動和控制系統圖等。
Lifts lift manufacturers to introduce the main structural parameters including the size of the overall design parameters, motion parameters, dynamic parameters, footprint and space; the overall layout, including components, spatial location and layout of the components of the relative motion of the components with the relationship. In determining the overall layout, should take full account of the ease of use and maintenance, safety, appearance, environmental protection and environmental requirements and other relations; includes product overall system schematic layout, mechanical transmission diagram, hydraulic system diagram, power drive and control system diagram.
2、升降機結構設計階段的主要任務是在總體設計的基礎上，對結構原理方案結構化，繪制產品總裝圖、部件裝配圖；提出初步的零件表，加工和裝配說明書；對結構設計進行技術經濟評價。在結構設計階段經常采用諸如有限元分析、優化設計、可靠性設計、計算機輔助設計等現代設計方法來解決設計中出現的問題。
Lift manufacturers to introduce the main task of the design phase of the lift structure is based on the overall design of the structural principles of the program structure, rendering the product assembly diagrams, parts assembly drawing; preliminary BOM, machining and assembly instructions; structural design technology economic evaluation. Often used in the structural design stage such as finite element analysis, optimization design, reliability design,computer-aided design, modern design methods to solve design problems.
3、最后確定結構原理方案根據初選結構方案，對主要功能結構進行詳細的結構原理方案設計；評價和修改對確定的結構原理方案經過技術經濟評價，為進一步的修改提供依據。
Lift manufacturers analysis to finalize the structure of the program based on the principles of primary structure of the program, the main function of the structure of detailed structural design principles; evaluation and modification of the structural principles of the program identified through technical and economic evaluation, to provide a basis for further modification.
請長按保存二維碼后點擊確定按鈕，進入微信掃一掃界面,點擊右上角‘相冊’選擇我們的二維碼,再點擊右上角‘完成’識別添加。
(為防止瀏覽器錯誤識別，請勿直接在瀏覽器中識別二維碼)
