1、升降機廠家http://m.it616.com.cn/建議大家采用先進的優先閥與負荷傳感全液壓轉向器形式，新系統能夠按照轉向要求，優先向其分配流量，無論負載大小、方向盤轉速高低均能保證供油充足，剩余部分可全部供給工作裝置回路使用，從而消除了由于轉向回路供油過多而造成功率損失，提高了系統效率，降低了液壓泵的工作壓力。
Lift manufacturer recommends that you use the advanced priority valve with load sensing hydraulic steering gear in the form of the new system in accordance with the requirements of the steering, assign priority traffic, regardless of load size, wheel speed level can ensure adequate oil supply, the remaining portion will be fully use work equipment supply circuits, thus eliminating the steering circuit oil caused by excessive power losses, improve system efficiency and reduce the hydraulic pressure of work.
2、升降機廠家提醒大家優化設計動臂油缸和液壓泵造型，降低系統工作壓力。通過優化計算，動臂油缸采用標準系列80/4。液壓泵排量由10ml/r提高為14ml/r，系統調定壓力為14MPa，滿足了動臂油缸舉升力和速度要求。
Lift manufacturers to remind you to optimize the design of the boom cylinders and hydraulic modeling, reduce system operating pressure. By optimizing the computing boom cylinder with standard series 80/4. Displacement hydraulic pump by 10ml / r increased to 14ml / r, the system set pressure is 14MPa, to meet the boom cylinder lifting force and speed requirements.
3、升降機廠家http://m.it616.com.cn/談到在使用過程中還應注意升降機的正確使用與維護，定期添加或更換液壓油，保持液壓油的清潔度，加強日常檢查和維護。
Speaking lift manufacturers should also be noted in the course of the proper use and maintenance of loaders, hydraulic oil regularly add or replace, maintain the cleanliness of hydraulic oil, strengthen the routine inspection and maintenance.
請長按保存二維碼后點擊確定按鈕，進入微信掃一掃界面,點擊右上角‘相冊’選擇我們的二維碼,再點擊右上角‘完成’識別添加。
(為防止瀏覽器錯誤識別，請勿直接在瀏覽器中識別二維碼)
